Courses

Through our network of qualified, skilled professional trainers; we deliver flexible, cost effective training services to the Transport and Logistics industry across Australia.

Contact us if the course you want is not shown below, or visit the Australian Government Training website to see the full list of our accredited courses.

Image

Bus & Coach

ITA have been training bus drivers for over 20 years in Nationally recognised qualifications and tailored programs. As a long-standing member of the Bus Industry Confederation and a supplier to major bus companies, we understand the industry better than most. We have over 200 qualified, experienced driver trainers authorised to deliver to the bus industry.

See all Bus & Coach courses

Industrial Services

Into Training Australia's Industrial Services training focuses on the risk related aspects of using industrial equipment to maintain capital assets and how to work safely in an industrial environment.

See all Industrial Services courses

Transport & Logistics

Into Training Australia is recognised as one of the leading transport and logistic training companies in Australia and are the provider of choice to some of the Australia's largest transport organisations.

We have achieved this by tailoring our programs to meet the industry's requirements and then training and assessing individuals to the highest calibre possible.

See all Transport & Logistics courses

Waste Management

Into Training provides training services to businesses that remove and recycle waste and clean infrastructure. We work with major Waste Management companies, State and Local Government and Utilities.

Our courses include Certificate III in Waste Recovery, and skill sets covering the Operations of High Jet Water Pressure, Drain Cleaning and Vacuum Loading equipment.

See all Waste Management courses

All courses

Administer a Fatigue Risk Management System [TLIF0006]

6043

This Nationally recognised course involves the skills and knowledge required for road transport schedulers or supervisors/managers to administer a fatigue risk management system within the Transport and Logistics industry. 
Find Out More

Administer Chain of Responsibility Policies & Procedures [TLIF0002]

6032

This nationally recognised course provides the skills and knowledge required to identify, apply and follow chain of responsibility policies and procedures in a supervisory role in relation to heavy vehicles.
Find Out More

Apply a Fatigue Risk Management System [TLIF0005]

6042

Fatigue Management Level 1 - Drivers
This Nationally recognised course is designed for Heavy Vehicle Drivers to assist in understanding the fatigue management requirements in the Heavy Vehicle National Law (NHVL).
Find Out More

Apply Chain of Responsibility Legislation, Regulations and Workplace Procedures [TLIF0001]

6033

Chain of Responsibility - Level 1
This Nationally recognised course provides participants with an understanding of the principal obligations in Chain of Responsibility in the HVNL and regulations or applicable State/Territory law and regulations.
Find Out More

Bus Driver Authority Course - NSW

5004

The course is comprised of the knowledge relating to the Transport for NSW proficiency standards to be a bus driver in NSW. This knowledge, together with an aptitude to being a public passenger bus driver, is assessed by trainers who have been authorised by Into Training Australia.
Find Out More

Cert IV HVDI - Stage 3 Units Workshop [3004]– Public Course NSW

AWS3004-HVDINSW

These workshops are for Stage 3 units for students already enrolled with ITA in the qualification  TLI41318 - Certificate IV in Transport and Logistics (Road Transport - Heavy Vehicle Driving Instruction).
Find Out More

Chain of Responsibility Awareness [ITA Course -Non Accredited]

5036

This is a non-accredited theory session for Chain of Responsibility. 
Find Out More

Chain of Responsibility Executive Brief [ITA Course - Non Accredited]

5002

This course is designed for Board members, Business Owners, Managing Directors, CEO’s and Managers. The aim of Chain of Responsibility (CoR) is to make sure everyone in the supply chain understands their obligations and shares responsibility for ensuring breaches of the Heavy Vehicle National Law (HVNL) do not occur.
 
Find Out More

Dangerous Goods Awareness [ITA Course - Non Accredited]

5035

This course covers the skills and knowledge required to handle Dangerous Goods and hazardous substances in accordance with relevant Work Health Safety WHS/Occupational Health and Safety Regulations within the transport and logistics industry. 
Find Out More

Dual Chain of Responsibility Level 1 & 2 [TLIF0001, TLIF0002]

6053

Dual Chain of Responsibility (Level 1 & 2) 
This course was created to save participants time by eliminating any doubling up of training or assessments for two Chain of Responsibility units:
  • TLIF0001 Apply chain of responsibility legislation, regulations & workplace procedures
  • TLIF0002 Administer chain of responsibility policies and procedures
Find Out More

Licence to Transport Dangerous Goods by Road [TLILIC0001]

6062

This Nationally recognised course covers the skills and knowledge required to obtain a Dangerous Goods driver’s licence to transport Dangerous Goods by road. It covers compliance with regulatory requirements but does not address all the skills and knowledge for the transportation of Dangerous Goods. On achieving this unit and obtaining a licence, further industry specific training will be required to satisfy legislative requirements to transport Dangerous Goods.
Find Out More

Load and Unload Goods/Cargo [TLID2004]

6012

Load Restraint
This Nationally recognised course f the mass, dimension and loading requirements in the Heavy Vehicle National Laws which are in place to decrease risks from excessively loaded or excessively large heavy vehicles.
Find Out More

Load Restraint Awareness [ITA Course - Non Accredited]

5034

This non-accredited theory only course, will provide participants with an understanding of the principles for restraining loads, how to calculate loads, how much restraint is required and the safety considerations you need to take into account. This course will not qualify participants to restrain loads, transport them or calculate the requirements. 
Find Out More

Low Risk Driver Training [TLIC1051, TLIF0011, TLIF0078]

6044

This Nationally recognised course is designed for all drivers (Heavy Vehicle and White fleet) to provide an understanding of Work Health & Safety laws, includes a general duty of care and this applies in road traffic when a vehicle is used for work-related purposes.
Find Out More

Operate a Drain Cleaning System - Skill Set [MSMSS00005]

6058

This Nationally recognised course is designed for persons who operate drain cleaning equipment. Participants will develop their knowledge to operate a drain cleaning system which may be used to clean, unblock or remove debris from a closed drain (pipe) or open channel drainage system.
Find Out More

Operate a High Pressure Water Jetting System - Skill Set [MSMSS00004 ]

6041

This Nationally recognised High Pressure Water Jetting Operator course, is designed for persons who operate high pressure water jetting equipment. Participants will develop their knowledge and skills to operate independently high pressure water jetting equipment in a safe manner and guide assistant operator/s within the water jetting team.
Find Out More

Operate a Vacuum Loading System - Skill Set [MSMSS00006]

6047

This Nationally recognised course is designed for persons who operate a vacuum loading system. Participants will develop their knowledge and skills to operate independently vacuum loading system equipment, in a safe manner and guide assistant operator/s within the vacuum loading system team.
Find Out More

Over Size Over Mass (OSOM - Accredited Units)

6045

This Nationally recognised course is designed to deliver training for the six accredited units that are required by RMS for people who are applying to become a Heavy Vehicle Escort Driver in NSW.
The course includes the Units: TLIC3010, TLIE3009, TLIF0075, TLIF3013, TLIF3060, TLID3002
Find Out More

Use High Pressure Water Jetting Equipment - Skill Set [MSMSS00003]

6040

This Nationally recognised course is designed for persons who use high pressure water jetting equipment. Participants will develop their knowledge and skills required to use high pressure water jetting equipment under the supervision of a competent operator within the water jetting team.
Find Out More

Working Safely Near Live Electrical Apparatus - NSW [UETTDREL14]

6050

This Nationally recognised course covers compliance with working safely up to the defined “safe approach distance” near energised electrical apparatus, including electrical powerlines for non-electrical workers.  Some of the information covered in this course is specific to the NSW requirements.
Find Out More

Working Safely Near Live Electrical Apparatus - NSW REFRESHER [UETTDREL14]

6060

This Nationally recognised refresher unit of qualification covered in this refresher course is:  UETTDREL14 Working safely near live electrical apparatus as a non-electrical worker.  Some of the information covered in this course is specific to the NSW requirements.
Find Out More

BDA Section 4 onlysection 4 only

7005

Find Out More

Certificate III In Driving Operations

TLI31216

As a leading supplier of transport industry training, ITA provides government funded Traineeships in most states, or fee for service training nationally. Some of the Certificate III in Driving Operations qualification streams we offer are: Agitator Driver, Bus Driver, Tanker driver, Heavy General Freight Driver, and Tip Truck Driver. 
 
Find Out More

Certificate III in Warehousing Operations

TLI31616

This is a general qualification for the Warehousing and Storage Industry. It involves a range of tasks involving known routines and procedures, and taking some accountability for the quality of work outcomes.

Our transport and logistics clients use this course to develop the skills and knowledge of new entrants into stores and warehousing or to recognise the skills of existing workers.
Find Out More

Certificate IV in Traffic Control Room OperationsWeb content

TLI40519

This is a qualification for those engaged in in traffic operations job roles within the Transport and Logistics Industry.  It is aligned to defined roles including Tunnel Road Operator and Open Road Operator.

This qualification is supported by the industry association, Australian Tunnel Operations Group (ATOG). Currently, Into Training Australia is the only Registered Training Organisation approved to deliver this qualification.

 
Find Out More

Certificate IV in Traffic Control Room OperationsGeneric Qualification - All electives [3220]

TLI40519

Find Out More

Certificate IV in Transport and Logistics (Road Transport - Heavy Vehicle Driving Instruction)

TLI41318

This is a qualification for those engaged in heavy vehicle driving instructor job roles within the Transport and Logistics Industry. Any person, who teaches, tests or assesses another person to drive or vary their driver licence and receives money or reward for teaching, testing or assessing, is required by law to hold a Driving Instructor's licence. In most States/Territories this qualification is required by the licensing regulators prior to an Instructor being approved to conduct heavy vehicle licence up-grades. 
Find Out More

Fatigue Management AwarenessOnline

7007

Find Out More

Can't find what you're looking for?

 

Into Training Australia is a privately owned Registered Training Organisation (7022) that provides training and associated workforce services nationally, to the transport, construction, waste management and local government sectors. 

 

Get in touch